A good minifigure display case keeps every figure upright and largely free of dust, with enough room above the head for a hat and behind the back for a cape. Our pick is the Lego Minifigure Display Case 16, and the rule for choosing any case is simple: count your figures, check how the case holds them, then compare clearance and dust protection.
The official case gives each figure its own compartment and grey baseplate, stacks when the collection grows and works on a wall or a desk. If you need more, this guide also covers wall cabinets for about 40 and about 80 figures, open acrylic shelves, a covered desk riser, single cubes for a Collectible Minifigures series and Lego's own brick-built Ninjago display. Most makers publish outside sizes only, so we also show what those numbers can and cannot tell you about the space inside.
Our pick: the Lego Minifigure Display Case 16
Lego Minifigure Display Case 16: one compartment and baseplate per figure
- Size: 38.2 cm wide, 18.4 cm high, 4.7 cm deep (382 × 184 × 47 mm)
- Capacity: 16 separate compartments on two levels, each with a grey baseplate
- Access: transparent doors that clasp shut
- Placement: wall or desk, with large studs on top for stacking further cases
- Material: polycarbonate and ABS, free of BPA and phthalates, no PVC
This is the officially licensed case, made by Room Copenhagen under the Lego name. Every figure stands on its own baseplate in its own compartment, so one figure never hides another. It needs a strip of wall or shelf 38.2 cm wide but only 4.7 cm deep, which means it also fits on a narrow ledge where a deeper cabinet would stick out.
Sixteen places suit the figures from one large set, a themed group or a complete Collectible Minifigures series, with room to spare if your series has 12 figures. When the collection grows, a second case sits on the studs of the first. Two stacked cases hold 32 figures in a column about 36.8 cm high, calculated from the stated height.
The weak spot is missing information. Neither Lego nor Room Copenhagen publishes the clear height or depth of a compartment. From the outside size you can only work out a ceiling: 184 mm over two levels is at most 92 mm per level, and that still includes walls, floor and baseplate. A standard figure is about 4 cm tall, so ordinary figures are not the concern. Tall headgear, wings and capes are, and for those there is no published number to check. Lego and Room Copenhagen describe it as suitable for wall mounting but do not say whether screws are included, so plan to supply your own.
Minifigure display cases compared by capacity and size
| Display | Figures | How figures are held | Stated size in cm | Dust protection | Wall or desk |
|---|---|---|---|---|---|
| Lego Minifigure Display Case 16 | 16 | Grey baseplate in each compartment | 38.2 W × 18.4 H × 4.7 D | Closed, transparent doors | Both |
| Lego Minifigure Display Case 8 | 8 | Grey baseplate in each compartment | 19.1 W × 18.4 H × 4.7 D | Closed, one door per compartment | Both |
| TJ.MOREE 5-tier wall display case | Up to 40 | 10 baseplates plus adhesive pads | 27.9 × 34.0 × 4.6 D outside; 2.5 D inside | Closed, lockable door | Wall, two hooks |
| Pro Collector's Minifigure Display Case | About 80 | Foot supports | 35.6 × 48.3 × 4.4 D; 5.7 shelf height | Closed, lockable door | Wall, hooks |
| Tapeera acrylic minifigure shelves (3-pack) | Up to 72 | 48 × 4 studs of baseplate per shelf | Each 39.1 long, 5.1 D | None, open | Wall, screws |
| XIN-SHI 3-tier acrylic display case | Up to 35 | Three removable steps, studs not stated | 25.5 × 15.5 × 13.7 | Covered box | Desk |
| Pokiiulk single minifigure cases (15-pack) | 15, one per case | Black base, studs not stated | About 6.6 × 5.7 × 6.6 each | Covered cubes | Desk |
| Lego Ninja Character Display 71866 | 8, included | Brick-built stand | 19 H × 14 W × 8 D | None, open | Desk |
All sizes are the makers' outside figures unless marked as inside. A standard minifigure is about 4 cm tall including the stud on its head, and one stud takes up 8 mm, so you can convert any baseplate length at 0.8 cm per stud. Depth is usually the tightest number: every closed wall case here is under 5 cm deep on the outside.
Room to grow: cases for 8, 40 and 80 figures
Lego Minifigure Display Case 8: the half-width sibling
- Size: 19.1 cm wide, 18.4 cm high, 4.7 cm deep
- Capacity: 8 figures on 8 grey baseplates over two levels
- Access: a separate door for each compartment
- Placement: wall or desk, stackable
The 8-case is the same system at half the width. Height and depth match the 16-case, so the two line up neatly side by side and cover 57.3 cm of wall for 24 figures (calculated). Lego says the case keeps figures free from dust and damage. Choose it for a small group, such as the figures from a single set, or to fill a gap beside a 16-case. The limitation is the same as on its bigger sibling: no published compartment height.
TJ.MOREE 5-tier wall display case: about 40 figures behind one lockable door
- Outside: 27.9 × 34.0 × 4.6 cm; inside: 25.9 × 32.0 × 2.5 cm
- Capacity: up to 40 figures on 5 tiers, with 4 removable shelves
- Fixing: 10 baseplates and 30 double-sided adhesive pads included
- Build: solid wood frame, hinged door with a lock
- Mounting: two hooks on the back
TJ.MOREE is one of the few makers that states the inside size as well as the outside, which makes this cabinet easy to plan. Forty figures over five tiers is eight per tier, and 25.9 cm of inner width divided by eight leaves about 3.2 cm per figure (calculated). That is four studs each, and a figure with a wide accessory may need two places.
Depth is the catch. About 2.5 cm inside is tight for capes, backpacks, wings and large weapons, and each tier is at most about 6.4 cm high including the shelf (32.0 cm over five tiers, calculated). The listing does not give the size of the 10 baseplates, so check whether they cover all five tiers; figures without a plate stand on the shelf platforms or on the included adhesive pads. Pick it for a growing collection of standard figures on one wall, and the lock helps if younger children share the room. Skip it if most of your figures wear capes.
Pro Collector's Minifigure Display Case: about 80 figures with a stated shelf height
- Size: 35.6 × 48.3 cm, 4.4 cm deep
- Capacity: about 80 figures
- Inside: 5.7 cm shelf height, objects up to 2.5 cm thick
- Door: lockable acrylic door that the maker says blocks 98% of UV light
- Included: foot supports, wall hooks and a felt background; no assembly
Once a collection passes 40 figures, this case puts about 80 behind a single door. It is also one of very few that state a shelf height: 5.7 cm. Subtract a 4 cm figure and about 1.7 cm remains above the head stud (calculated), so measure any tall hats, helmets or raised hair pieces in your collection against that margin before you order.
The 2.5 cm depth limit matches the TJ.MOREE cabinet, so capes and backpacks are again the risk. Figures stand on foot supports rather than studs. For scale, two stacked 16-cases cover about 38.2 × 36.8 cm of wall for 32 figures; this case takes a similar width and 11.5 cm more height for about 80 (calculated). It suits a large collection of standard figures that should stay locked away from dust and fingers.
Hats, hair and capes: checking clearance on paper
A standard minifigure is about 4 cm tall including its head stud. Hair pieces, hats, helmets and raised accessories add height, while capes, backpacks and wings add depth. Two numbers in a listing tell you whether those fit: the clear height of a tier or compartment, and the inside depth.
Inside depth is the space between the back panel and the door, about 2.5 cm in both wall cabinets above. Shelf height should mean the free space from one shelf to the next; only Pro Collector's states it.
When only the outside size is published, dividing the height by the number of levels gives a ceiling, not a usable size, because walls, floors, shelves and baseplates all take their share. That is why the 92 mm per level of the Lego 16-case and the 6.4 cm per tier of the TJ.MOREE cabinet are upper bounds. Room Copenhagen does not publish compartment sizes for its Lego cases, so for unusually tall or bulky figures, choose an open display with nothing above the figure.
Open shelves or a closed case
An open shelf has no door and no ceiling, so the only limit is the depth of the shelf. The trade-off is dust: open baseplates gather it quickly, and a long row of figures takes a lot of wall. A closed case or cover cuts down the dusting, but every door and lid limits what fits.
Tapeera acrylic minifigure shelves (3-pack): open shelves with real studs
- Size: each shelf 39.1 cm long and 5.1 cm deep
- Studs: four removable 12 × 4 baseplates per shelf, 48 × 4 studs in total
- Capacity: up to 72 figures across the 3 shelves
- Fixing: screws and anchors included
Each shelf carries 48 × 4 studs, which works out to 38.4 cm of baseplate on a 39.1 cm shelf (calculated). Tapeera's 72 figures means 24 per shelf. In two staggered rows of 12, each figure gets four studs, or 3.2 cm, of shelf length (calculated). Figures with wide accessories need more space, so expect to fit fewer than 72 if many of yours carry them.
With nothing overhead, height is never the limit, and 5.1 cm of depth leaves room for a second row. According to the listing, the shelves also suit BrickHeadz and small sets. What you give up is dust protection, so plan on regular dusting. Pick these for a large, varied collection that includes figures no closed case here can take.
XIN-SHI 3-tier acrylic display case: a covered riser for the desk
- Size: 25.5 × 15.5 × 13.7 cm (which side is the height is not stated)
- Capacity: up to 35 figures on 3 removable steps
- Build: closed acrylic box with tongue-and-groove joints
- Placement: desk, stackable
The steps lift each row above the one in front, so the back row stays visible in a box small enough for a desk. The maker says the box keeps dust off the figures. Thirty-five figures over three steps is about 12 per step; if 25.5 cm is the width, that leaves roughly 2.1 cm per figure (calculated), so a full box means figures standing shoulder to shoulder.
The listing text does not mention studs on the steps, although its main photo shows studded tiers, so check the product details if you want figures fixed in place. The same idea works in a plain acrylic box without steps, where a small brick-built riser raises the back row. Because the listing does not say which dimension is the height, compare the product photos with your tallest figure before you order.
Displaying a Collectible Minifigures series
A Collectible Minifigures series is a fixed group of figures that belongs together, which suits a dedicated display. Check the figure count of your series first, because it decides which option fits without gaps. A series of 12 fills 12 of the 16 compartments in the Lego Minifigure Display Case 16 and leaves four free for favourites from the next one.
Pokiiulk single minifigure cases (15-pack): one cube per figure
- Size: about 6.6 × 5.7 × 6.6 cm per case
- Capacity: 15 cases, one figure each
- Build: clear acrylic cover on a black base, stackable
- Dust: listed as dust-proof
Single cubes let you rearrange a series, take one figure to the desk or add the next series without buying a new frame. Fifteen cubes hold a series of up to 15 figures, and stacked cover to cover they build a small wall of figures on a shelf.
The listing states about 6.6 × 5.7 × 6.6 cm per cube but gives different figures in its details, so treat the size as approximate. It does not say how much of that is free space inside or whether the bases have studs. The maker says the cubes suit 95% of standard minifigures.
A picture frame with a printed series background is another popular way to show one series on the wall. Frames are made for flat pictures, so check the inner depth of the frame against your figures before you buy one.
Lego's own brick-built display
Ninja Character Display 15th Anniversary 71866
- Pieces: 447
- Age: 14 and up
- 8 figures included, built display 19 × 14 × 8 cm
Lego's own answer is a display you build yourself. The Ninjago 15th anniversary set comes with eight minifigures and a brick-built stand for all eight, 19 cm high, 14 cm wide and 8 cm deep. It is open, so it offers no protection from dust, but there is no door or lid to limit hats, weapons or capes either.
Treat it as a centrepiece for a Ninjago shelf rather than a home for a whole collection, because it holds the eight figures it comes with. At 8 cm deep it needs a shelf at least 8 cm deep, almost twice the depth of the wall cases here.
Wall or desk, sunlight and cleaning
Wall mounting saves desk space and keeps figures away from small hands. TJ.MOREE and Pro Collector's include hooks, and Tapeera includes screws and anchors. For the Lego cases, have your own fixings ready and choose ones that suit your wall. A desk case is easier to open and rearrange, which matters if you change your line-up often.
Keep every display out of direct sunlight, which can fade and yellow prints and plastic. Pro Collector's says its door filters UV light, but a shaded wall is the safer choice for every option here. If older figures have already yellowed, our step-by-step guide to cleaning Lego covers washing and restoring discoloured pieces.
Closed cases still need an occasional wipe, while open shelves need dusting much more often. Figures on studs can be lifted off for a proper clean.
Minifigure display case FAQ
Do the official Lego cases keep dust out?
They are closed with transparent doors, so far less dust reaches the figures than on an open shelf. Lego says the 8-case keeps figures free from dust and damage, but neither Lego nor Room Copenhagen states a seal for the 16-case. Treat both as dust-reducing rather than sealed.
Do minifigures with hats fit in a display case?
That depends on the case, and most makers do not publish the number you need. Pro Collector's 5.7 cm shelf height leaves about 1.7 cm above a standard 4 cm figure, and Room Copenhagen gives no compartment height for the Lego cases. For tall hats, wings or capes, open shelves are the safer choice.
Can you stack the Lego minifigure cases?
Yes. The 16-case has large Lego studs on top for stacking further cases, and the 8-case is stackable too. Both are 18.4 cm high and 4.7 cm deep. Two 16-cases on top of each other hold 32 figures in a column about 36.8 cm high (calculated).
Which minifigure display case should you buy?
Start with the number of figures, then the space you have:
- A first case or one complete series: Lego Minifigure Display Case 16.
- A small group or a gap beside a 16-case: Lego Minifigure Display Case 8.
- About 40 standard figures on one wall: TJ.MOREE 5-tier wall display case.
- About 80 figures behind a lockable door: Pro Collector's Minifigure Display Case.
- Figures with big hats, wings or capes: Tapeera acrylic minifigure shelves.
- A covered display for the desk: XIN-SHI 3-tier acrylic display case.
- A series you like to rearrange: Pokiiulk single minifigure cases.
Figures you are not displaying are better off in a box, and our Lego storage boxes guide and Lego storage ideas cover the rest of the collection. If some figures deserve a lockable cabinet, our list of the most expensive Lego minifigures shows which ones, and our guide explains how to tell an original minifigure from a fake.
