Lego® toys are among the all-time favorite toys. It is known to help develop one’s creativity and play with your imagination. You can create a simple Lego car or huge intricate structures of different Lego themes. Playing Lego is an exciting and fun activity for both kids and parents. However, it may be tough to separate small Lego pieces. No worries, I got you covered. Here we will show you the 5 best options to get Lego pieces apart without putting your nails and teeth at risk.
The 5 Methods to separate small Lego® pieces
It is sometimes a little bit frustrating when it takes you time to separate small Lego® pieces apart. Sometimes, the Lego bricks are stuck for the longest time you can think of. Some of you might also find using your fingernails and teeth in pain. Oftentimes, it works using your teeth and nails. But it is not recommendable due to the hazard that comes along with it, such as:
- Teeth damage
- Mouth injuries
- Ingestion
- Choking hazard
- Hygiene concerns
- Long-term nail damage
- Finger injuries
Here we will give you the 5 best methods how to get Lego pieces apart and the steps on how to do it successfully.
1. Handy Tool: Lego® Brick Separator
The Lego® brick separator comes in almost all Lego sets. This would be a very useful device for building your Lego creations or your Lego City. This tiny tool helps get Lego pieces apart, regardless of size, in a single snap. It can be used differently depending on the bricks or Lego pieces to remove. Here will show you how to remove it using the Lego brick separator.
Use the Wedge
The flat end or the wedge of the Lego® brick separator is used ideally to get Lego pieces apart, such as plates and tiles. Older versions of the Lego brick separators have this wedge that differs in size. But it serves the same purpose as well. Here’s how to do it.
Procedure:
- Simply slide the Lego brick separator underneath a small gap between the two Lego pieces.
- Once in place, gradually twist and wiggle it in a back-and-forth motion. This loosens the two attached Lego pieces.
Another way to separate small Lego pieces attached to huge flat plates. The procedure is easy by following these steps.
Procedure:
- Use the wedge of the brick separator by simply jamming it into the underside grove part of the tile.
- Apply pressure by pressing it down to remove the Lego pieces.
Remove pins using the pin remover.
The Lego brick separator also has a pin remover to remove Lego pins. The pin remover is the tool's elongated part located in the middle portion. It is underneath the two studs. This is so easy to do that it would not take much of your time to execute.
Procedure:
- Connect the pin remover part to the pin you want to remove.
- Press the Lego pins outwards, and it will immediately remove the Lego pin apart.
Use the underside of the Lego® Brick Separator.
Every part of the tool has its own purpose. One of them is to use its underside. Getting Lego® pieces apart is easy. Just connect the underside portion to any studs of Lego bricks. Below are the detailed steps on how to do it.
Procedure:
- Make sure to connect the underside of the brick separator to the Lego studs.
- Once connected, apply pressure to ensure that they are tightly connected.
- Press down the Lego brick separator and twist it down to remove the bricks.
2. The Classic Method: Twist and Pull
The twist-and-pull method is one of the most common methods to separate small Lego® pieces. This does not require any devices or tools to execute. All you need to do is to have a solid force to pull it apart. Here are the easy steps to do it safely without hurting you.
Procedure:
- To separate small Lego pieces, grab them in one hand.
- Twist the two bricks to loosen the connection. It is done in the opposite direction.
- Gradually pull them apart while still twisting.
- If it is still difficult to get Lego pieces apart, try to twist and pull them using different directions.
3. The Leverage Trick
You do not need to worry if you lose your Lego® brick separator. That is totally fine. There are still ways how to get Lego pieces apart by simply being resourceful. This method will show you how to remove it by creating your own tool using the Lego bricks as the separator. Here is how the leverage trick works.
Procedure:
- To create the tool, grab two Lego bricks in different sizes. Connect the two Lego pieces together and create a ‘T’ shape.
- Using the underside part of the “T’ shape, connect it to the Lego studs of the Lego bricks you want to remove.
- Apply force by pressing it down and twisting up the “T” shape bricks to have it removed.
4. Freeze it up!
If you think you have already exhausted all the methods you can think of, we still have more. Freezing the Lego® bricks can help you separate small Lego pieces apart. All you need to have is a plastic bag, and you are ready to get them in the freezer.
Procedure
- Place the Lego bricks you want to separate in a Zip Lock or a plastic bag.
- Ensure the plastic bag is completely sealed before placing it in a freezer.
- Leave the plastic bag in the freezer overnight.
- Remove the plastic bag from the freezer. Allow it to thaw in a room-temperature area for about 10 minutes.
- Grab the Lego bricks from the plastic bag and gradually twist and pull them apart.
5. Soap and Warm Water Method
Using soap and warm water techniques is another classic and effective method. This method is easy to do and is also used as one of the effective ways to remove Lego® stickers without damage. You will only need mild dish soap and a container filled with warm water.
Procedure:
- Using a container, fill it up with warm water enough to submerge the Lego bricks.
- Before placing the Lego bricks, add a small amount of mild dish soap into the container.
- Mix it in with the warm water.
- Soak the Lego bricks for about 20 minutes.
- Occasionally stir the water to get Lego pieces apart easily.
- Remove the bricks and shake excess water with a dry towel.
- Separate the bricks by using the twist-and-pull method.
Frequently Asked Questions on how to get Lego® pieces apart
Are you still having challenges with how you separate small Lego® pieces? Does it take your time to complete your Lego Architecture Skylines set? I’m sure you still have many questions about how to get Lego pieces apart. Here we gathered all the common questions that might be helpful to you.
Where can I purchase a Lego® brick separator?
The Lego® brick separator can be purchased directly from the official Lego website. You can also purchase Lego brick separator on Amazon.
How much is a Lego® brick separator?
The cost of the Lego® brick separator starts from $1.99 / 1.88€.
Do all Lego® sets come with a Lego brick separator?
Yes. Most of the Lego® sets released nowadays come with a Lego brick separator.
Is it safe for children to use the Lego® brick separator?
Yes. The Lego® brick separator is safe for kids so long they know how to use it. It is also made of toxic-free plastic material. Adult supervision may be needed if the kids have difficulty using the tool.
Summary
It is frustrating when you fail to get Lego® pieces apart. The methods we provided you will surely help you complete your Lego masterpieces. This can be a very challenging task to do. However, it will be a fulfilling experience when you separate small Lego pieces. It completes your Lego building experience. Together with the dedication, perseverance, and effort you pour into it.
Are you still eyeing more Lego toys like Lego Harry Potter to add to your ever-growing collection? You want to buy Lego sets at the best price? In the Brickfact price comparison, you can choose from a variety of providers and save money. The Brickfact app informs you via push notification as soon as a new Lego deal is available. The Brickfact app is free and available for both iOS and Android.